DevHeads.net

Postings by Walter H.

Error at sdhci-pci, kernel

Hello,

CentOS 6.8, kernel 2.6.32-642.3.1.el6.x86_64

sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:10.0: SDHCI controller found [8086:2294] (rev 21)
sdhci-pci 0000:00:10.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:00:10.0: Invalid iomem size. You may experience problems.

Manually configured Firewall (WLAN-AP plus Router)

Hello

I've got this Mini-PC
<a href="https://www.zotac.com/product/mini_pcs/zbox-ci323-nano" title="https://www.zotac.com/product/mini_pcs/zbox-ci323-nano">https://www.zotac.com/product/mini_pcs/zbox-ci323-nano</a>

everything is fine -> latest 6.8 kernel works;
both Ethernet-Interfaces work and also the WLAN-Interface works;

the two Ethernet-Interfaces are eth0 and eth1
the WLAN-Interface is wlan0

eth1 is connected on ISP side
eth0 is connected on my LAN side to a switch;
and wlan0 shall also be on my LAN side für wireless and work as an Access-Point
(this works)

I want both LAN interfaces (eth0 and wlan0) have the same IP subnet
so I did this:
<a href="http://www.microhowto.info/howto/persistently_bridge_traffic_between_two_" title="http://www.microhowto.info/howto/persistently_bridge_traffic_between_two_">http://www.microhowto.info/howto/persistently_bridge_traffic_between_two_</a>

Hardware Support of CentOS 6: Mini-PC

Hello,

can CentOS 6.8 be run on a mini-PC like this?
<a href="https://www.zotac.com/product/mini_pcs/zbox-ci323-nano" title="https://www.zotac.com/product/mini_pcs/zbox-ci323-nano">https://www.zotac.com/product/mini_pcs/zbox-ci323-nano</a>

would like to configure this as a Firewall, and this should be instead of
my router (integratet firewall, NAT) and wlan-ap

Thanks,
Walter

yum timeout ... (CentOS 6.8)

Hello,

the last times, when I tried to update,

it get time outs; even when 'yum list'

[root@host ~]# yum list
Loaded plugins: fastestmirror, security
Determining fastest mirrors
epel/metalink | 13 kB 00:00
* base: centos.den.host-engine.com
* epel: mirror.steadfast.net
* extras: centos.den.host-engine.com
* updates: centos.den.host-engine.com
<a href="http://centos.den.host-engine.com/6/os/x86_64/repodata/repomd.xml:" title="http://centos.den.host-engine.com/6/os/x86_64/repodata/repomd.xml:">http://centos.den.host-engine.com/6/os/x86_64/repodata/repomd.xml:</a> [Errno
12] Timeout on <a href="http://centos.den.host-engine.com/6" title="http://centos.den.host-engine.com/6">http://centos.den.host-engine.com/6</a>
/os/x86_64/repodata/repomd.xml: (28, 'Operation too slow.

Console screen changed on updating from CentOS 6.7 to CentOS 6.8?

Hello,

I have several CentOS 6 VMs, I have updated the first one successfully,
but there is one thing I miss or I don't like;

How do I get the standard console with 80x25 back?

Hello,

this is /boot/grub/grub.conf

default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title CentOS (2.6.32-642.el6.x86_64)
root (hd0,0)
kernel /vmlinuz-2.6.32-642.el6.x86_64 ro
root=UUID=a27dc9a0-ea3a-497d-a9c3-80c7bbba31fa rd_NO_LUKS
LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto
rd_NO_DM rd_NO_LVM KEYBOARDTYPE=pc KEYTABLE=de config_NO_HZ vga=0x0300
initrd /initramfs-2

Successful update from CentOS 6.7 to CentOS 6.8, but ...

Hello,

I have several CentOS 6 VMs, I have updated the first one successfully,
but there is one thing I miss or I don't like;

How do I get the standard console with 80x25 back?

this is /boot/grub/grub.conf

default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title CentOS (2.6.32-642.el6.x86_64)
root (hd0,0)
kernel /vmlinuz-2.6.32-642.el6.x86_64 ro
root=UUID=a27dc9a0-ea3a-497d-a9c3-80c7bbba31fa rd_NO_LUKS
LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto
rd_NO_DM rd_NO_LVM KEYBOARDTYPE=pc KEYTABLE=de config_NO_HZ vga=0x0300
initrd /initramfs-2.6.32-6

Looking for location of some specific settings in CentOS 6.x

Hello,

I have several virtual machines, all with CentOS 6.x and one so called
virtual server at a web hoster

my virtual machines (VMware) were all installed manually using the .iso,
some exist longer and therefore
were originally a CentOS 6.3, some are newer and wer originally a CentOS
6.6;
and this virtual server has been installed using a preconfigured image
from the web hoster;

on all this virtual machines and the virtual server several 'yum update'
brought them to same release, not CentOS 6.7,
as I havn't updated to 6.8 yet;

at the virtual server I find this

export LS_OPTIONS="--

ClamAV from EPEL

Hello,

just curious;
since March 3rd, 2016 everdays logwatch-mail
shows this:

Last Status:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.99 Recommended version: 0.99.1

on May 4th, 2016 I updated clamav by
yum update clamav
since then the daily logwatch-mail
shows this:

Last Status:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.99.1 Recommended version: 0.99.2

I guess, that it happened accidentally, that I just updated the day
before ClamAV did a bigger change;
as I had tried 'yum update clamav' several times b

CentOS 6 as DNS-Server

Hello,

it has been a while since I had setup a DNS-Server with CentOS 6;
these days I added a few zones needed for DDNS; this works
but in /etc/ I found quite a strange file, I'm not sure if it was in use
at the beginning I used this system as a DNS-Server, and after several
'yum update'
not any more;

/etc/named.root.key with this content

managed-keys {
# DNSKEY for the root zone.
# Updates are published on <a href="mailto:root-dnssec- ... at icann dot org">root-dnssec- ... at icann dot org</a>
.