DevHeads.net

Postings by David Moreau Simard

Re: [CentOS-devel] Ceph Jewel 10.2.10 available for testing (now released)

Ceph Jewel 10.2.10 was tagged for release after several weeks of testing
with no
reported issues.

It will make it's way to the stable repositories during the next
synchronization.

David Moreau Simard
Senior Software Engineer | OpenStack RDO

dmsimard = [irc, github, twitter]

New build for origin 3.7 ?

Hi,

The last build for origin 3.7 alpha dates back to october 4th [1] and
there's now been a release candidate built [2].

Can we expect a new build in the origin 3.7 testing repositories soon ?

Thanks !

[1]: <a href="http://cbs.centos.org/koji/buildinfo?buildID=20056" title="http://cbs.centos.org/koji/buildinfo?buildID=20056">http://cbs.centos.org/koji/buildinfo?buildID=20056</a>
[2]: <a href="https://cbs.centos.org/koji/taskinfo?taskID=238682" title="https://cbs.centos.org/koji/taskinfo?taskID=238682">https://cbs.centos.org/koji/taskinfo?taskID=238682</a>

David Moreau Simard
Senior Software Engineer | OpenStack RDO

dmsimard = [irc, github, twitter]

Ceph Jewel 10.2.10 available for testing

Hi,

Ceph Jewel 10.2.10 was released upstream on October 8th and is now
available for testing [1] from the Ceph storage SIG repositories.

You can find the release notes for 10.2.10 here [2] and the spec
update here [3].

To test this new release of Ceph, you will need to enable the testing
repositories like so:

yum -y install centos-release-ceph-jewel
yum-config-manager --enable centos-ceph-jewel-test

We plan on releasing 10.2.10 soon if no issues are reported.

Thanks !

[1]: <a href="http://cbs.centos.org/koji/buildinfo?buildID=20348" title="http://cbs.centos.org/koji/buildinfo?buildID=20348">http://cbs.centos.org/koji/buildinfo?buildID=20348</a>
[2]: <a href="http://ceph.com/releases/v10-2-10-jewel-released/" title="http://ceph.com/releases/v10-2-10-jewel-released/">http://ceph.com/releases/v10-2-10-jewel-released/</a>
[

Need Ceph ppc64le builds to update to Jewel 10.2.9

Hi,

I've successfully imported and did a scratch build of Ceph Jewel
10.2.9 [1] in order to update from 10.2.7.

Information on the release:
- Spec changes [2]
- Changelog (note: updating from 10.2.7, 10.2.8 is avoided) [3]

I was looking forward to make it available for testing soon but I've
noticed that build failures on ppc64le are currently blocking new
builds.

Can we get that looked into sometime soon ?

Thanks !

[1]: <a href="https://cbs.centos.org/koji/taskinfo?taskID=209182" title="https://cbs.centos.org/koji/taskinfo?taskID=209182">https://cbs.centos.org/koji/taskinfo?taskID=209182</a>
[2]: <a href="https://github.com/CentOS-Storage-SIG/ceph/commit/48c41edaa31c3ff45234f4167cc00756099c298e" title="https://github.com/CentOS-Storage-SIG/ceph/commit/48c41edaa31c3ff45234f4167cc00756099c298e">https://github.com/CentOS-Storage-SIG/ceph/commit/48c41edaa31c3ff45234f4...</a>
[3]: <a href="http://docs.ceph.c" title="http://docs.ceph.c">http://docs.ceph.c</a>

Ceph Jewel 10.2.7 now tagged for -testing

Hi,

Please take note that Ceph Jewel 10.2.7 has been tagged for testing after a
successful smoke test of an initial build.
It should land on the buildlogs CDN shortly.

Ceph Jewel in the stable release repository is currently at 10.2.5 since
10.2.6 had not been built.

You can find the release notes for the new versions upstream:
- 10.2.6 (March 8th): <a href="http://ceph.com/releases/v10-2-6-jewel-released/" title="http://ceph.com/releases/v10-2-6-jewel-released/">http://ceph.com/releases/v10-2-6-jewel-released/</a>
- 10.2.7 (April 10th): <a href="http://ceph.com/releases/v10-2-7-jewel-released/" title="http://ceph.com/releases/v10-2-7-jewel-released/">http://ceph.com/releases/v10-2-7-jewel-released/</a>

The Ceph storage SIG rebuilds straight from upstream source RPMs found here
[1].
We version spec file differences on GitHub

Hammer 0.94.9 tagged for testing

Hi,

Please note that Ceph Hammer 0.94.9 has been tagged for testing.
The previous release provided in the stable channel of the
centos-release-ceph-hammer package provided 0.94.5.

To test this new release:
yum -y install centos-release-ceph-hammer
yum-config-manager --enable centos-ceph-hammer-test

This is a straight rebuild from upstream source RPM.
For release notes, please refer to upstream [1].

We would like to expedite the release of this new version due to the
age of the previous release, 0.94.5 dating back to December 14th 2015.
There are also problems running 0.94.5 against a CentO

Ceph status update in the storage SIG

Hi centos-devel,

Fran├žois Cami posted in December, seeking help to maintain the Ceph
packages within the Storage SIG intiative [1].

With this, we've got reinforcements -- the new members of the storage
SIG for Ceph packaging are:
- David Moreau Simard
- Giulio Fidente
- Thomas Oulevey

We've already begun kicking the tires and tagged Ceph Jewel 10.2.3 for
release (which had been in testing since September).
Ceph Jewel 10.2.5 has been built and will likely be tagged to -testing
after some initial testing.

We're also in the process of updating Ceph Hammer from 0.94.6 to
0.94.9, although note

ceph-jewel: Can we get a release ?

Hi,

<a href="http://buildlogs.centos.org/centos/7/storage/x86_64/ceph-jewel/" title="http://buildlogs.centos.org/centos/7/storage/x86_64/ceph-jewel/">http://buildlogs.centos.org/centos/7/storage/x86_64/ceph-jewel/</a> has
Ceph 10.2.3 since *at least* 2016-09-28 but it's still not hit public
mirrors, can we get a release ?
ipv6 support is broken in 10.2.2, we need 10.2.3 to land in public mirrors.

Thanks,

David Moreau Simard
Senior Software Engineer | Openstack RDO

dmsimard = [irc, github, twitter]

Backport of a qemu fix for /dev/kvm permissions ?

Hi,

To make a long story short, in certain circumstances, the /dev/kvm
file can sometimes have permissions that do not allow it to be used
properly [1].

This claims to have been fixed in qemu-2.3.0-1.fc22.
I was wondering if we should expect that fix to land in the
qemu-kvm-ev-2.3.0* packages provided by the virt SIG repo ?

I know for a fact the patch is not there (yet) right now:

(on Fedora):

$ rpm -q --scripts qemu-system-x86
postinstall scriptlet (using /bin/sh):
# Default /dev/kvm permissions are 660, we install a udev rule changing that
# to 666.